The Impact of a Six-Hour Light-Dark Cycle on Wheat Ear Emergence, Grain Yield, and Flour Quality in Future Plant-Growing Systems.

Cultivating wheat (Triticum aestivum) in a closed environment offers applications in both indoor farming and in outer-space farming. Tailoring the photoperiod holds potential to shorten the growth cycle, thereby increasing the annual number of cycles. As wheat is a long-day plant, a night shorter than a critical length is required to induce flowering. In growth chambers, experiments were conducted to examine the impact of a 6 h light-dark cycle on the timing of wheat ear emergence, grain yield, and flour quality. Under equal daily light-integral conditions, the 6 h light-dark cycle promoted growth and development, resulting in accelerated ear emergence when compared to a 12 h cycle, additionally indicating that 12 h of darkness was excessive. To further stimulate heading and increase yield, the 6 h cycle was changed at the onset of stem elongation to a 14 h-10 h, mimicking spring conditions, and maintained until maturity. This successful transition was then combined with two levels of light intensity and nutrient solution, which did not significantly impact yield, while tillering and grain ripening did increase under higher light intensities. Moreover, it enabled manipulation of the baking quality, although lower-end falling numbers were observed. In conclusion, combining a 6 h light-dark cycle until stem elongation with a 14 h-10 h cycle presents a promising strategy for increasing future wheat production in closed environments. The observation of low falling numbers underscores the importance of factoring in flour quality when designing the wheat-growing systems of the future.

Evaluation of the efficacy of cinnamon oil on Aspergillus flavus and Fusarium proliferatum growth and mycotoxin production on paddy and polished rice: Towards a mitigation strategy.

In the present investigation, the effect of cinnamon oil (CO) (10, 30, 50 and 70 %) on the growth rate (mm/day) and aflatoxin B1 (AFB1) and fumonisin B1 (FB1) production of Aspergillus flavus (AF01) and Fusarium proliferatum (FP01) isolates, respectively was determined at optimum water activities (0.95 and 0.99 aw) and temperatures (25, 30 and 35 °C) on paddy and polished rice grains. The results showed that the growth rate, AFB1 and FB1 production of all the fungal isolates decreased with an increase in CO concentrations on both matrices. AF01 and FP01 failed to grow under all conditions on paddy at 50 % of CO concentration whereas both fungi were completely inhibited (No Growth-NG) at 70 % of CO on polished rice. Regarding mycotoxin production, 30 % of CO concentrations could inhibit AFB1 and FB1 production in both matrices (No Detection-ND). In this study, the production of mycotoxins was significantly influenced by cinnamon oil compared to the growth of both fungi. These results indicated the promising potential of CO in improving the quality of rice preservation in post-harvest; however, further investigations should be evaluated on the effects on the qualitative characteristics of grains. Especially, the prospective application of CO in rice storage in industry scales to mitigate mycotoxin contamination need also to be further researched. Moreover, collaboration between researchers, agricultural experts, and food industry should be set up to achieve effective and sustainable strategies for preserving rice.

An Impact Assessment of Par-Baking and Storage on the Quality of Wheat, Whole Wheat, and Whole Rye Breads.

Par-baking technology increases the production efficiency of bread. However, the degree of par-baking can vary significantly amongst product types and intended sales markets, leading to substantial differences in the quality attributes of the finished product. The objective of this study was to explore the impact of the degree of par-baking on the technological quality of wheat, whole wheat, and whole rye bread (95, 75, and 50% of full baking time). More specifically, this study focused on the starch pasting behavior of different flour formulations, the crumb core temperature during par-baking, and the influence of the degree of par-baking on the bread characteristics of (composite) wheat bread as a function of storage time. The quality attributes of par-baked bread (0 and 4 days after par-baking) and fully baked bread (0 and 2 days after full baking) were assessed. A reduction in the degree of par-baking from 95 to 50% resulted over time in 19.4% less hardening and 8.6% more cohesiveness for the re-baked wheat breads. Nevertheless, it also negatively impacted springiness (-9.1%) and adhesion (+475%). It is concluded that using the core temperature to define the degree of par-baking is not sufficient for bread loaves intended to be consumed over time, but the results indicate that reducing the degree of par-baking can be beneficial for certain quality aspects of the breads.

Physicochemical, structural, and functional characterization of pectin extracted from quince and pomegranate peel: A comparative study.

Pectin's physicochemical, structural, and functional characteristics vary widely depending on the source of extraction. In this study, pectins were extracted from seedless quince and pomegranate peel, and their physicochemical, structural, and functional properties were investigated. A Box-Behnken Design with three factors and three levels was applied to optimize the pectin extraction yield from each matrix. As a result, the best extraction yields for quince pectin (QP) and pomegranate peel pectin (PPP) were 11.44 and 12.08 % (w/w), respectively. Both extracted pectins exhibit a linear structure, with the homogalacturonan domain dominating the rhamnogalacturonan I. Both pectins are highly methyl-esterified (DM > 69 %) with a higher degree of acetylation for PPP than QP, with 12 and 8 %, respectively. Unlike QP, PPP has a narrow, homogenous distribution and greater molecular weight (120 kDa). Regarding functionality, 1 g of QP could retain 4.92 g of water, and both pectin emulsions were more stable at room temperature than at 4 °C. When the concentration of QP is increased, rheological measurements demonstrate that it exhibits pseudoplastic behavior. Finally, QP can be used as a thickener, whereas PPP can be utilized as starting material for chemical changes to create multifunctional pectins.

Unlocking the potential of pasting properties to predict extrudate characteristics of corn grits blends with high amylose corn starch, potato starch, or rice flour.

The development of new production lines of extruded ready-to-eat (RTE) snacks often results in high losses of edible food due to the trial-and-error approach in industry. Being able to predict extrudate characteristics of new formulations before having to run trials on industrial scale would be beneficial for reducing waste and having a more efficient development process. With this study, the correlation between pasting properties of seven blends of flours/starches and extrudate characteristics was investigated (100% corn grits, 25% and 50% replacement of corn grits with high amylose starch, potato starch, and rice flour). The predictive power of pasting characteristics on extrudate's moisture content, water absorption and solubility index, sectional expansion index (SEI) and hardness was studied. Results indicated the potential of predicting SEI, water solubility index (WSI), and water absorption index (WAI) of RTE-snacks. WSI and WAI were, respectively, negatively correlated with peak temperature (R2  = 0.897), and positively with peak temperature and positively with trough viscosity (R2  = 0.855). One can conclude that the rheometer can be a useful tool to gain insight into the characteristics of the extrudate, although further research with enlargement of the dataset is necessary to make the rheometer effectively deployable for potentially other extrudate characteristics.

Effect of wheat dextrin on corn flour extrusion characteristics.

Wheat dextrin is a modified wheat starch, classified as water-soluble. This study investigated the effect of wheat dextrin as an ingredient in corn flour blends on extrusion characteristics. Blends were prepared at 0, 10 and 20 % fibre content. DOE was used to design experiments and investigate the effects of variables selected to be studied. Feed moisture content was set at 18-25 %, temperature at 110-150 °C and specific feeding load at 0.100-0.150kg/rev. Moisture content, water absorption and solubility indices, color, sectional expansion index, density, hardness, crispiness (work (Wc) and number of spatial ruptures (Nsr)) and specific mechanical energy were evaluated. A regression model was established using response surface methodology, and processing conditions for optimal quality were generated (e.g., WSI: 96.9 %, SME: 96.9 %, final MC: 93.9 %). Wheat dextrin solubility characteristics for moisture content, WAI and WSI were inconclusive, showing a high tendency to insoluble behavior. For expansion, lightness and SME characteristics depended on processing conditions, especially temperature. Crispness was highest at low MC (18.87 %) x high fiber content (20 %) (e.g., Nsr: 1.2-1.5/mm), whereas values were the lowest at high MC (25.70 %) x low fiber content (0 %) (e.g., Nsr: 0.5-0.7/mm). Optimal conditions were set at 12 % fiber content, 19 % feed moisture content, 130 °C and a specific feeding load of 0.146 kg/rev. This study showed that it is impossible to classify wheat dextrin as acting strictly according to soluble fiber characteristics based on extrudate characteristics.

The fate of quinolizidine alkaloids during the processing of lupins (Lupinus spp.) for human consumption.

Lupin, a protein-rich grain legume, and products thereof, are becoming increasingly important in our diets. However, variable and high concentrations of quinolizidine alkaloids (QAs) may hamper this evolution. This study assessed the fate of QAs when processing Lupinus albus seeds and lupin-based foods, to give a first indication of the food industry's ability to sufficiently reduce the QA concentration. Typical unit processes, including toasting, dehulling, sterilization (sterilized jarred lupins), oven baking (cookies), frying (chips) and boiling in water (pasta), were simulated on lab-scale. A quantitative determination of five QAs and qualitative screening of other relevant QAs, in the derived fractions and lupin-based foods, was performed with a validated UHPLC-MS/MS and -HRMS method, respectively. Results revealed that the reduction in quinolizidine alkaloid content is highly dependent on the applied unit process, that QAs appear to be heat stabile, and that the depletion can be attributed to the leaching in cooking water.

The potential of UVC decontamination to prolong shelf-life of par-baked bread.

The effect of UVC (254 nm) treatment on the mould-free shelf-life of par-baked wholemeal, rye and six-grain bread was examined. Currently, these breads are par-baked, wrapped in high-density polyethylene (HDPE)-foil and transported or stored at room temperature for a couple of days before being full-baked and sold/consumed. Generally, after five days, these breads show signs of mould spoilage. A shelf-life increase in one or more days would already offer immense economical and logistic benefits for the baker or retailer. In this study, the parameters fluence rate (irradiation intensity), fluence (UV dose), distance to the UV-lamp (DTL) and number of layers of a common wrapping HDPE-foil (20 µm) were diversified. The breads were subjected to a UVC treatment (0-2502 mJ/cm²), packed and stored at room temperature for a period of 15 days (21.5 ± 0.8°C). Similar as for the breads, agar plates with mould spores of Aspergillus niger, Aspergillus montevidensis and Penicillium roqueforti were UVC treated (0-1664 mJ/cm²) and checked daily for visible mould growth during 15 days (25°C). Aspergillus niger showed the strongest resistance towards UVC, a fluence of 800 mJ/cm² was needed to inhibit growth during 15 days of storage, whereas for P. roqueforti and A. montevidensis, respectively, UV levels of 291 and 133 mJ/cm² were found sufficient. Furthermore, the shelf-life of wholemeal, rye and six-grain bread can be prolonged from 5 to 6, 8 and 9 days, respectively, using 2502 mJ/cm². The effect of higher UVC dosage on shelf-life reached a maximal level and was strongly impacted by the wide spread on data of mould-free shelf-life. The main factors influencing the potential of UV decontamination were the rough bread surface, differences in DTL, the possibility of post-contamination and UV permeability of packaging materials.

Suitable nitrogen fertilizer application drives the endosperm development and starch synthesis to improve the physicochemical properties of common buckwheat grain.

The effects of nitrogen (N) fertilizer on endosperm development, starch component, key enzyme activity and grain quality of common buckwheat were investigated in this study. The results showed that N fertilization significantly enhanced the number and area of endosperm cells, and significant increases were also observed in the contents of amylose, amylopectin and total starch. With increasing N level, the activities of key enzyme significantly increased showing the maximum under the N2 level (180 kg N ha-1), and then decreased under high N level. As N level increased, the ash, crude protein and amylose content varied from 1.36 to 2.25 %, from 7.99 to 15.84 % and from 22.69 to 27.64 %, respectively. The gelatinization enthalpy significantly increased with the range of 3.46-5.66 J/g, while no change was found in crystalline structure of common buckwheat flour. These results indicated that appropriate N application could effectively improve the endosperm development, starch synthesis and accumulation, and grain properties of common buckwheat, with the best effect under the level of 180 kg N ha-1.

The Impact of Salt Accumulation on the Growth of Duckweed in a Continuous System for Pig Manure Treatment.

Duckweed (Lemna) is a possible solution for the treatment of aqueous waste streams and the simultaneous provision of protein-rich biomass. Nitrification-Denitrification effluent (NDNE) from pig manure treatment has been previously used as a growing medium for duckweed. This study investigated the use of a continuous duckweed cultivation system to treat NDNE as a stand-alone technology. For this purpose, a system with a continuous supply of waste streams from the pig manure treatment, continuous biomass production, and continuous discharge that meets the legal standards in Flanders (Belgium) was simulated for a 175-day growing season. In this simulation, salt accumulation was taken into account. To prevent accumulating salts from reaching a toxic concentration and consequently inhibiting growth, the cultivation system must be buffered, which can be achieved by altering the depth of the system. To determine the minimum depth of such a system, a tray experiment was set up. For that, salt accumulation data obtained from previous research were used for simulating systems with different pond depths. It was found that a depth of at least 1 m is needed to prevent a significant relative growth inhibition at the end of the growing season compared to the start. This implies a high water consumption (5-10 times more than maize). As a response, a second cultivation system was investigated for the use of more concentrated NDNE. For this purpose, salt tolerance experiments were conducted on synthetic and biological media. Surprisingly, it was observed that duckweed grows better on diluted NDNE (to 75% NDNE, or EC of 8 mS/cm) than on a synthetic medium (EC of 1.5 mS/cm), indicating the potential of such a system.

Principles and Guidelines for In-Line Viscometry in Cereal Extrusion.

In the food industry, extrusion cooking finds numerous applications thanks to its high productivity and nutrient retention. More specifically, cereal extrusion, e.g., for savory snacks and breakfast products has an important market share. For such applications, rheology, which addresses viscous and elastic contributions, plays an important role in developing, optimizing, and controlling the extrusion manufacturing technique. In this context, conventional off-line rheometers are not ideal for providing data, as the goal is to replicate the exact thermomechanical history to which the food is subjected in the extrusion process. Hence, to achieve reliable analyses, in-line viscometers that have mostly been tested using oil-based polymers were introduced. Biopolymers (e.g., starch), however, are highly sensitive to both heat and mechanical degradation, and the viscometer design has to be adapted accordingly to produce an accurate measurement. Alongside a discussion of the different designs available, this review will address the most common methodologies for measuring the steady shear viscosity, extensional viscosity, and the first normal stress difference for food applications, providing researchers in the biopolymer and food engineering fields with a general introduction to this emerging topic.

Predictive modelling of the radial growth of Aspergillus flavus and Fusarium proliferatum on paddy and white rice (Oryza sativa).

The growth of Aspergillus flavus 01 (AF01) and Fusarium proliferatum 01 (FP01) was studied on paddy and white rice, using a full factorial design with five temperature levels (20, 25, 30, 35 and 40 °C) and five points of water activity (0.80, 0.85, 0.90, 0.95 and 0.99 aw). The maximum radial growth rates (µmax, mm.day-1) and lag times (λ, days) of both fungal strains were estimated by linear regression. When the obtained values were compared with the prediction of reported predictive models for growth of A. flavus 01 and F. proliferatum 01, none of the reported models was able to describe the growth as determined by water activity and temperature adequately. Therefore, new secondary models were developed to describe the obtained fungal radial growth rate of both strains on paddy and white rice as a function of temperature and water activity. The results showed that optimum radial growth rate of AF01 and FP01 were estimated at 0.99 aw/35 °C and 0.99 aw/30 °C, respectively. Both strains failed to grow at 0.80, 0.85 and 0.90 aw at all observed temperatures (except for AF01 at 0.90aw/35 °C). Multi-factorial cardinal and General Polynomial models were the best models to describe combined influence of water activity and temperature on fungal growth rate on both matrices with the bias factors of 0.771-1.10 and accuracy factors of 1.102-1.297. These values should be concerned during storage to mitigate fungal growth on paddy and white rice.

Relationship between nitrogen fertilizer and structural, pasting and rheological properties on common buckwheat starch.

Nitrogen is an essential element for the yield and quality of grain. In this study, the structural and physicochemical properties of two common buckwheat varieties under four nitrogen levels (0, 90, 180, 270 kg N ha-1) at one location in two years were investigated. With increasing nitrogen level, the contents of moisture and amylose decreased but the contents of ash and crude protein increased. Excessive nitrogen application significantly increased the granule size, but reduced the light transmittance, water solubility, swelling power, absorption of water and oil. All the samples showed a typical A - type pattern, while high relative crystallinity and low order degree were observed under high nitrogen level. The samples under high nitrogen level had lower textural properties, pasting properties and rheological properties but higher pasting temperature and gelatinization enthalpy. These results indicated that nitrogen fertilizer significantly affected the structural and physicochemical properties of common buckwheat starch.

Physicochemical Characterization of Thirteen Quinoa (Chenopodium quinoa Willd.) Varieties Grown in North-West Europe-Part II.

Quinoa cultivation has gained increasing interest in Europe but more research on the characteristics of European varieties is required to help determine their end use applications. A comparative study was performed on 13 quinoa varieties cultivated under North-West European field conditions during three consecutive growing seasons (2017-2019). The seeds were milled to wholemeal flour (WMF) to evaluate the physicochemical properties. The WMFs of 2019 were characterized by the highest water absorption capacity (1.46-2.06 g/g), while the water absorption index (WAI) between 55 °C (2.04-3.80 g/g) and 85 °C (4.04-7.82 g/g) increased over the years. The WMFs of 2018 had the highest WAI at 95 °C (6.48-9.48 g/g). The pasting profiles were characterized by a high viscosity peak (1696-2560 mPa.s) and strong breakdown (-78-643 mPa.s) in 2017. The peak viscosity decreased in 2018 and 2019 (823-2492 mPa.s), while breakdown (-364-555 mPa.s) and setback (19-1037 mPa.s) increased. Jessie, Summer Red, Rouge Marie, Vikinga, and Zwarte WMFs were characterized by low WAIs and high shear resistance. Bastille WMF developed high viscosities and, along with Faro WMF, showed a high breakdown. The wide variation in physicochemical properties suggests that the potential food applications of WMFs depend on the variety and growing conditions.

Comparison of antifungal activity of essential oils of clove, lemongrass and thyme for natural preservation of dried apricots.

Currently, the majority of fresh apricots destined for the production of dried apricots undergo sulphur oxide fumigation before drying to protect the fruit against fungal spoilage. To eliminate the use of sulphite, packaging assisted with essential oil is a promising strategy to increase shelf-life of dried apricots since it does not impact its flavor characteristics. In this study, three essential oils were selected: clove, lemongrass and thyme. They were screened for antifungal activity against Eurotium spp. with different methods: micro- and macro-dilution and agar-diffusion. Growth/no-growth data were used to develop models for all three methods. Clove exerted the strongest antifungal activity with an inhibitory concentration of 0.075%, 0.035% and 0.05% through respectively micro-dilution, macro-dilution and agar diffusion. For thyme the following values were obtained: 0.775%, 0.070% and 0.100%. This means that the antifungal activity of thyme is 10 times lower in micro-dilution and 2 times lower in macro-dilution and agar diffusion compared to clove. Through micro-dilution, lemongrass was found to have the second highest antifungal activity (0.25%). When used in the volatile atmosphere of dried apricots and in macro-dilution, the antifungal activity of lemongrass was the lowest, with respective values of > 0.200% and 0.105% for G/NG prediction.

Streptomyces Strains Promote Plant Growth and Induce Resistance Against Fusarium verticillioides via Transient Regulation of Auxin Signaling and Archetypal Defense Pathways in Maize Plants.

Driven by climate change, Fusarium ear rot (FER) caused by Fusarium verticillioides occurs frequently in maize worldwide. In parallel, legislative regulations and increasing environmental awareness have spurred research on alternative FER biocontrol strategies. A promising group of bacterial control agents is Streptomyces species due to their metabolic versatility. However, insights into the molecular modes of action of these biocontrol agents are often lacking. This study aims at unraveling the biocontrol efficacy of Streptomyces rhizobacterial strains against F. verticillioides. We first assessed the direct antagonism of four Streptomyces strains ST02, ST03, ST07, and ST08. Then, a profile of 16 genes associated with intrinsic plant defense signaling was assessed in maize plants. Both in vitro and in vivo data showed that the biocontrol strain ST03 perfectly suppressed the growth of F. verticillioides. High inhibition efficacy was also observed for extracellular compounds in the supernatant secreted by this strain. Especially, for maize cobs, the biocontrol strain ST03 not only inhibited the proliferation of F. verticillioides but also significantly repressed fungal fumonisin production 7 days after inoculation. On maize plants, the direct antagonism was confirmed by a significant reduction of the fungal DNA level in soils when co-applied with F. verticillioides and strain ST03. In terms of its action on plants, strain ST03 induced downregulation of auxin responsive genes (AUX1, ARF1, and ARF2) and gibberellic acid (GA)-related gene AN1 even in the absence of F. verticillioides at early time points. In leaves, the biocontrol strain induced the expression of genes related to salicylic acid (SA), and 2,4-dihydroxy-7-methoxy-1,4-benzoxazin-3-one (DIMBOA)-mediated pathways, and pathogenesis-related proteins in the presence or absence of the pathogen. Interestingly, the biocontrol strain significantly promoted plant growth even in the presence of F. verticillioides. All of which demonstrated that the Streptomyces strain ST03 is a promising FER biocontrol and a growth-promoting candidate.

Yield and Nutritional Characterization of Thirteen Quinoa (Chenopodium quinoa Willd.) Varieties Grown in North-West Europe-Part I.

The cultivation of quinoa has gained increasing interest in Europe. Different European varieties exist, but more research is required to understand the individual variety characteristics for end-use applications. The objective of this study is to evaluate the agronomic performance of 13 quinoa varieties under North-West European field conditions during three growing seasons (2017-2019). Furthermore, seeds were qualitatively characterized based on characteristics and composition. Yield differed among varieties and growing seasons (0.47-3.42 ton/ha), with lower yields obtained for late-maturing varieties. The saponin content varied from sweet to very bitter. The seeds contained high protein levels (12.1-18.8 g/100 g dry matter), whereas varieties had a similar essential amino acid profile. The main fatty acids were linoleic (53.0-59.8%), α-linolenic (4.7-8.2%), and oleic acid (15.5-22.7%), indicating a high degree of unsaturation. The clustering of varieties/years revealed subtle differences between growing seasons but also reflected the significant interaction effects of variety and year. Most varieties perform well under North-West European conditions, and their nutritional content is well within the values previously described for other cultivation areas. However, optimal yield and quality traits were not combined in one variety, illustrating the importance of breeding for adapted quinoa varieties.

Molecular Insights into Defense Responses of Vietnamese Maize Varieties to Fusarium verticillioides Isolates.

Fusarium ear rot (FER) caused by Fusarium verticillioides is one of the main fungal diseases in maize worldwide. To develop a pathogen-tailored FER resistant maize line for local implementation, insights into the virulence variability of a residing F. verticillioides population are crucial for developing customized maize varieties, but remain unexplored. Moreover, little information is currently available on the involvement of the archetypal defense pathways in the F. verticillioides-maize interaction using local isolates and germplasm, respectively. Therefore, this study aims to fill these knowledge gaps. We used a collection of 12 F. verticillioides isolates randomly gathered from diseased maize fields in the Vietnamese central highlands. To assess the plant's defense responses against the pathogens, two of the most important maize hybrid genotypes grown in this agro-ecological zone, lines CP888 and Bt/GT NK7328, were used. Based on two assays, a germination and an in-planta assay, we found that line CP888 was more susceptible to the F. verticillioides isolates when compared to line Bt/GT NK7328. Using the most aggressive isolate, we monitored disease severity and gene expression profiles related to biosynthesis pathways of salicylic acid (SA), jasmonic acid (JA), abscisic acid (ABA), benzoxazinoids (BXs), and pathogenesis-related proteins (PRs). As a result, a stronger induction of SA, JA, ABA, BXs, and PRs synthesizing genes might be linked to the higher resistance of line Bt/GT NK7328 compared to the susceptible line CP888. All these findings could supply valuable knowledge in the selection of suitable FER resistant lines against the local F. verticllioides population and in the development of new FER resistant germplasms.

Impact of Season, Region, and Traditional Agricultural Practices on Aflatoxins and Fumonisins Contamination in the Rice Chain in the Mekong Delta, Vietnam.

The current study aimed to evaluate the impact of the crop season, cultivation region, and traditional pre- and post-harvest agricultural practices on mycotoxin contamination in the Mekong Delta rice chain of Vietnam. The results showed that aflatoxins (AFs) and fumonisins (FBs) were predominantly detected in both paddy (n = 91/184, 50%) and white rice (n = 9/46, 20%). Aflatoxin B1 (AFB1)-contaminated paddy samples (n = 3) exceeded the regulatory threshold (5 µg·kg-1). The contamination of paddy with AFs and FBs was not significantly different by growing seasons and cultivation localities. Evidently, in the winter-spring season, fumonisins frequently occurred in paddy planted in Can Tho, while AFs were found in paddy planted in regions Dong Thap and An Giang, and such toxins were absent in Can Tho. Furthermore, the selection of paddy varieties strongly impacted the occurrence of these toxins, especially AFs, for example, line DT8 and Jasmine were susceptible to AFs and FBs. In addition, poor pre- and post-harvest practices (such as crop residue-free fields, fertilizer application, unsanitary means of transport, delayed drying time) had an impact on the AFs and FBs contamination. Our findings can help to understand the dynamics of AFs and FBs in the rice chain in the Vietnamese Mekong Delta, leading to the mitigation of the contamination of AFs and FBs in rice.

Contamination of Fusarium proliferatum and Aspergillus flavus in the Rice Chain Linked to Crop Seasons, Cultivation Regions, and Traditional Agricultural Practices in Mekong Delta, Vietnam.

This study evaluates the influence of crop seasons, cultivation regions, and traditional agricultural practices on the occurrence of F. proliferatum and A. flavus in the rice chain in the Mekong Delta, Vietnam. A survey on pre- and post-harvest practices was performed from 2017 to 2019 in parallel with sampling. Results showed that F. proliferatum (36.3%) and A. flavus (10%) were predominantly present throughout the rice chain. These fungi frequently occurred in winter-spring and autumn-winter crops in Can Tho paddy. Especially, F. proliferatum appeared both on the field and during transportation (50-100%), while A. flavus presented at all stages (10-33%). The occurrence of F. proliferatum reduced 70-27% after drying, depended on the seasons, compared to field and transportation stages and could not be detected anymore at further stages. Applying poor pre-harvest agricultural practices such as the use of certain varieties (Jasmine, DT8 varieties), combination of fertilizers (organic-inorganic), fields with crop debris, unhygienic boats, and delayed drying time of 8-12 h or 12-28 h resulted in an increase in fungal contamination on paddy. This study provides a detailed description of fungi contamination in crop seasons, cultivation regions, and agricultural practices, which may help in understanding the fungal dynamic and allow identification of good agricultural practices to mitigate the fungal contamination and potential mycotoxin production.